Insulated Transport Materials
Hotcoldshop is part of Krautz-TEMAX Group.
Welcome to the category “Transport”.
In this category you will find all kinds of products and solutions for temperature protection of temperature sensitive products, refrigerated, fresh, frozen, ambient in road transport, air freight, sea freight or fine distribution. If you have not found what you are looking for, and you are looking for a specific solution for your transport, please send us an email. We will be happy to help you.
BI-Fold insulated folding cover for roll containers
BI-FOLD Insulated cover for roll containers - Automatic folding system - Very quick to use - No floor contact HACCP - Folding door with Velcro tape - Outer material gitternetz film - Inner material PE with mesh structure - Washable - Address window with rain flap - Reinforced edge at the bottom - Handles - Full edge trim - Integrated folding plates - Integrated back panel.
- Insulation thickness :
- TEFOAM thickness 1.2cm
- Roll container standard size :
- Door opening 72 x depth 80 x fence height
- Custom production
- Fence height :
- 140 cm – 150 cm – 160 cm – 170 cm – 180 cm
Insulation multicouche Temax op rol 1,25m x 12,5m
Temax insulation on a roll width 1.25m x length 12.5m - Thermal air-cushion foil + reflection foil - Finished with stitching seams - Multilayer isolation technique - Isolation foil fastened with PE pins - Not laminated = loose layers = easy to disassemble for recycling
- Insulation thickness
- Temax 500 = thickness approx. 0.7 cm
- Temax 1000 = thickness approx. 1.4 cm
- Temax 2000 = thickness approx. 2 cm
- Temax 4000 = thickness approx. 3.5 cm
- Notes
- Price does not include transport (collection only possible).
- If a transport price is required, please contact us.
Mobile storage container for storing sleeves
Temax multilayer insulation on roll 3m x 9m
Temax insulation on rolls width 3m x length 9m - Thermal air-cushion foil + reflection foil - Finished with stitching seams - Multilayer insulation technology - Insulation foil fixed with PE pins - Not laminated = loose layers = easy to disassemble for recycling
- Insulation thickness
- Temax 500 = thickness approx. 0.7 cm
- Temax 1000 = thickness approx. 1.4 cm
- Temax 2000 = thickness approx. 2 cm
- Temax 4000 = thickness approx. 3.5 cm
Protective cover with folding door for roll containers
Temax protective cover with folding door to protect products in roll containers against water and dust. (Can also be produced to measure)
- Water-resistant cover for roll containers
- Protection against water and dust
- Roll container standard size 72 x 80 x fence height 145 cm (customised production possible)
- Address window for transport documents
- Extra reinforced PVC bottom edge
- Handles on two sides
Insulated Thermo Covers for Roll Containers
Temax insulated cover with middle closure and velcro closure for insulating roll containers for chilled, fresh and frozen products. (Can also be produced to measure)
- Can be used for chilled, fresh and frozen products
- High insulation quality TEFOAM thickness 1,2cm
- Velcro closure in the middle of the front side
- Roll container standard size 72 x 80 x fence height 145cm (customised production possible)
- Address window for transport documents
- Extra reinforced PVC bottom edge
- Handles on two sides
Insulated Thermo Covers with Folding Door
Temax insulated cover with folding door and velcro fastener for insulating roll containers for refrigerated, fresh and frozen products. (Can also be produced to measure)
- Can be used for chilled, fresh and frozen products
- High insulation quality TEFOAM thickness 1,2cm
- Folding door with velcro closure on the front side
- Roll container standard size 72 x 80 x fence height 145cm (customised production possible)
- Address window for transport documents
- Extra reinforced PVC bottom edge
- Handles on two sides
EPS Insulated Pallet Boxes
EPS insulated pallet box with unique thermal sealing system and cooling compartments for cooling elements.
- Dimensions: 80 x 120 x height 100cm (material thickness 9cm)
- EPS palletshipper or pallet box for transport and storage of cooled, fresh and frozen products
- Easy to assemble via mounting slots (no cold bridges)
- UNIQUE : thermal seal system = must be broken to open
- UNIQUE : thermal seal system = no cold bridges
- UNIQUE : thermal seal system = avoid wrong packing. Pressing = sealed = automatically thermally closed and sealed.
- Insulation thickness EPS palletshipper = 9cm
- Integrated slits for cooling elements (boxes)
- Cooling boxes with cooling elements
- EPS production 15-18 kg/m³
- UNIQUE: can be produced to size (please send us an email)
Bitemp Mobibox Thermocontainer
Mobibox thermocontainer - an insulated cover on the inside of a roll container for the transport of two temperatures of fresh, refrigerated and frozen products on one roll container. (Can also be made to measure)
- Two temperatures on one roller container = Bitemp roller container
- Transform your standard roller container into a thermocontainer
- Can be used for refrigerated, fresh and frozen
- High insulation quality TEFOAM thickness 1.2cm
- Hinged door with replaceable insulated industrial zippers
- Storage compartment for cooling elements or dry ice
- Is applied once on the inside of your roll container
- Roll container standard size 72 x 80 x fence height 145cm (customized production possible)
- Case size: width 66cm x depth 40cm x height 145cm
Mobibox Thermocontainer
Mobibox thermocontainer - an insulated cover on the inside of a roll container for the transport of fresh, refrigerated and frozen products. (Can also be produced to measure)
- Transform your standard roller container into a thermocontainer
- Can be used for refrigerated, fresh and frozen
- High insulation quality TEFOAM thickness 1.2cm
- Replaceable insulated, industrial zippers
- Two doors = Loading possible on both sides = ergonomics
- Storage compartment for cooling elements or dry ice
- Is applied once on the inside of your roll container
- Roll container standard size 72 x 80 x fence height 145cm (customized production possible)
- Case size: width 66cm x depth 81cm x height 145cm
SEA-EYE sea container insulation liners, insulating 20DV-HC / 40DV-HC / 45HC sea containers
Temax SEA-EYE insulation and liners for insulating sea containers for cold and hot temperature protection of conditioned products in sea freight with 20DV 20HC 40DV 45HC containers.
- Insulation of sea containers : 20DV 20HC 40DV 45HC
- Quick and easy assembly and disassembly with suspension system
- Suspension from suspension loops in the sea container
- All sides and corners stitched with overlap
- Can be used several times with normal use
- Flexible and foldable material
- With or without floor insulation
COOLFLEX-H Insulated Flexible Partition Walls
COOLFLEX-H insulated flexible partition wall for trucks and refrigerated trailers for the transport of refrigerated, fresh and frozen or ambient products.
- For use in refrigerated or freezer trailers
- Flexible and foldable
- Insulation thickness 2 cm / Tefoam-2 with integrated reflection films
- Waterproof and washable
- Easy to use with two cargo bars and Velcro straps
- Each side 10cm overlap = sealing with truck walls
- Closes with truck wall by wind pressure of the cooling motor
COOLFLEX-V Insulated Flexible Partition Walls
COOLFLEX-V insulated flexible partition wall for trucks and refrigerated trailers for the transport of refrigerated, fresh and frozen or ambient products.
- For use in refrigerated or freezer trailers
- Flexible and foldable
- Insulation thickness 2 cm / Tefoam-2 with integrated reflection films
- Waterproof and washable
- Easy to use with three cargo bars and Velcro straps
- Each side 10cm overlap = sealing with truck walls
- Closes with truck wall by wind pressure of the cooling motor
Cargo bars for trucks and trailers
Temax cargo bars with belt for securing cargo and mounting partition walls in trucks and trailers
- Extendable cargo bar
- Fixing system with strap and lever
- Very easy to use : memory of pull-out position
- Rubber feet on both ends
- Supported tubes for extra strength
- Use when positioning partition walls Coolflex-V and Coolflex-H
Reusable Insulated Covers for IBC-Containers
The reusable insulated cover for IBC-Container is used to protect all kinds of liquids from external temperatures during storage, transport or distribution.
- Protection against cold and heat
- Mid-split closure with Velcro on front side
- Frost protection of water-based paints, lacquers or lacquers
- Insulation thickness approx 1.2cm (Insulation foam + reflection + bubble wrap)
- Reusable : service life approx. 5 years with normal use
- Reinforced foil inside and outside
- Splits at bottom for forklift trucks
- Address window for transport documents
- Standard size 100 x 120 x height 120 cm
Thermal Blankets for Pallets
Temax SET thermal blankets for insulating pallets, Euro and Block, in lower deck air cargo for pharmaceutical and healthcare products 15-25°C and 2-30°C, refrigerated fresh food and more
- Insulation of air cargo pallets in LOWER deck (aircraft)
- Euro / block pallets (variable height up to max 160cm)
- Validated by pharmaceutical companies
- Ambient products : 15-25°C / 2-30°C / 0-40°C
- Tested for summer and winter profile, solar power and greenhouse effect
- Tested according to EN-12546-2 and stress test 8% product mass
- Validated by food producers in chilled fresh shipments
- Disposable / recyclable due to NON lamination construction
- To use with Temax sealing tape (link laying)
TEMAX Single-use Insulated Pallet Covers
The Temax insulated cover for pallets with middle split closure, for single use, is used to insulate pallets with temperature sensitive products against hot and cold temperatures.
- For single use with middle split closure
- Nutrition = refrigerated and frozen products
- Medicines = Cooling products and ambient products
- Chemicals = Cooling and antifreeze products
TEMAX One-Way & Q-Fold Insulated Pallet Covers
The Temax Q-Fold insulated cover for pallets , for single use , is used to insulate pallets with temperature sensitive products against hot and cold temperatures .
- For single use with 4 foldable sides
- Nutrition = refrigerated and frozen products
- Medicines = Cooling products and ambient products
- Chemicals = Cooling and antifreeze products
REMAX One-Way & Q-Fold Insulated Pallet Covers
The Remax Q-Fold insulated cover for pallets is a reusable, long-life cover used to insulate pallets of temperature sensitive products from hot and cold temperatures.
- 4 foldable sides with Velcro
- Refrigeration products, freezing products, ambient products
- Insulation thickness Remax-1R1 0.35 cm and Remax-2R2 0.7 cm
- Reusable
- Address window for transport documents
REMAX Single-use Insulated Pallet Covers
The Remax insulated cover for pallets with middle closure, for single use, is used to insulate pallets with temperature sensitive products against hot and cold temperatures.
- Disposable with center split closure
- Nutrition = refrigerated and frozen products
- Medicines = Cooling products and ambient products
- Chemicals = Cooling and antifreeze products
TEFOAM Q-Fold Reusable Insulated Pallet Covers
The Tefoam Q-Fold insulated cover for pallets is a reusable cover with a long lifespan that is used to insulate pallets with temperature sensitive products against hot and cold temperatures.
- 4 foldable sides with Velcro
- Refrigeration products, freezing products, ambient products
- Insulation thickness approx 1.2cm (Insulation foam + reflection + bubble wrap)
- Reusable : service life approx. 5 years with normal use
- Reinforced foil inside and outside
- Height control for lower pallet heights
- Splits at bottom for forklift trucks
- Address window for transport documents
TEFOAM Reusable Insulated Pallet Covers
The Tefoam insulated cover for pallets is a reusable cover with a long lifespan that is used to insulate pallets with temperature sensitive products against hot and cold temperatures.
- Middle Closure with Velcro on front side
- Refrigeration products, freezing products, ambient products
- Insulation thickness approx 1.2cm (Insulation foam + reflection + bubble wrap)
- Reusable : service life approx. 5 years with normal use
- Reinforced foil inside and outside
- Height control for lower pallet heights
- Splits at bottom for forklift trucks
- Address window for transport documents
Insulated Bottom Pallet Covers with Flaps
The Temax insulated bottom with flaps for pallets, for single use, is used together with an insulated cover to insulate pallets with temperature sensitive products against hot and cold temperatures.
- For single use
- Food = refrigerated and frozen products
- Medicines = Cooling products and ambient products
- Chemicals = Cooling and antifreeze products
Insulated Bottom Pallet Covers
The Temax insulated bottom for pallets, for single use, is used together with an insulated cover to insulate pallets with temperature sensitive products against hot and cold temperatures.
- For single use
- Food = refrigerated and frozen products
- Medicines = Cooling products and ambient products
- Chemicals = Cooling and antifreeze products
Insulated Pallet Boxes with Door
The insulated pallet box with door is used for the transport and distribution of refrigerated, fresh and frozen products. The high insulation quality and robust design makes the container an efficient and durable means of transport for both food and medicines.
- Applications for chilled, fresh and frozen food and medicines
- High insulation quality: U(k) value 0.70 W/m²K
- PE material with reinforced metal bottom
- Swing door with locking system
- Reinforced metal hinges
- Metal hook-loop closing system for easy closure of the door
- Rubber seal between door and container
- Easy to clean, both inside and outside
- Slots on the roof for cooling elements
- incl. cooling plates 60 x 27 x H5 cm (-21°C)
- Inc. Steel intermediate shelf
- incl. plastic address window (A5)
Insulated Pallet Boxes with Lid
The insulated pallet box with lid is used for the transport and distribution of refrigerated, fresh and frozen products. The high insulation quality and robust design, as well as the mono block structure, make the container an efficient and durable means of transport for both food and medicines.
- Applications for chilled, fresh and frozen food and medicines
- High insulation quality: U(k) value 0.70 W/m²K
- PE material with reinforced metal bottom
- Top opening (lid)
- Reinforced metal hinges
- Lid can be closed airtight, without locking
- Has seats at each corner to allow stacking of containers
- Rubber seal between lid and container
- Easy to clean, both inside and outside
- Incl. plastic address window (A5)
Mobile Insulated Thermocontainers with Door
The mobile insulated thermo container with door is used for the transport and distribution of chilled, fresh and frozen products. The high insulation quality and robust design makes the container an efficient and durable means of transport for food and medicines.
- Applications for chilled, fresh and frozen food and medicines
- Easy to move with reinforced wheels (2 swivel)
- High insulation quality: U(k) value 0.70 W/m²K
- PE material with reinforced metal bottom
- Ergonomic handles
- Swing door with locking system
- Reinforced metal hinges
- Metal hook-loop closing system for easy closure of the door
- Rubber seal between door and container
- Easy to clean, both inside and outside
- Slots on the roof for cooling elements
- incl. cooling plates 60 x 27 x H5 cm (-21°C)
- Inc. Steel intermediate shelf
- Incl. plastic address window (A5)